When should you worry about cracks in your walls?
Turning a blind eye to cracks in walls may mean you’re missing the warning signs for serious and ongoing structural damage caused by subsidence.
Cracks in walls are common in buildings; though some are nothing to worry about, others can indicate a sinking or damaged foundation (subsidence). If you don’t address problematic cracks in walls, the damage to the foundations can quickly devalue the property.
Cracked Walls Closed Up with Resin Injection
Mainmark raised a 80m2 slab back to level with minimal disruption to the community care’s residents.
Multi-storey Business Complex Saved from Subsidence with JOG and Teretek®
Scope of works comprised of the design, supply, installation and survey verification of JOG and Teretek® to improve ground conditions, fill voids and, where possible, re-level the commercial properties.
Cracked Walls in commercial and industrial buildings
Mainmark’s concrete levelling methods can lift buildings of any size, having been used with great success on numerous projects around the world. The level correction solutions we provide to the commercial and industrial sector are sought for many reasons, a significant factor being how time and cost efficient the processes are.
Buildings that are out of level often develop wall cracks, these can occur internally and externally. As the building is brought back to level these cracks generally close up, leaving only a little patching and painting to deal with. Most importantly, structural damage is resolved, and the future of the building is sound.
When do wall cracks indicate a structural problem?
Larger cracks that display these characteristics may indicate weaknesses in the building’s foundation:
- One side of the wall is higher than the other
- Doors and windows no longer close in their frame
- Cracks are wider than about 5mm (or half a centimetre) or big enough to insert your little finger in them
Problematic wall cracks will typically start at windows, doorways or corners of buildings and are often zig-zag or stepped cracks in brickwork which usually follow the mortar lines. Generally, smaller hairline cracks are not cause for concern. These are usually the result of seasonal expansion and contraction of soils beneath the building over time, and can be easily patched and re-painted.
What causes large cracks in walls?
Large cracks may appear because the property’s foundation has shrunk or lost its strength, causing all or a part of a building to sink, known as subsidence. This usually happens because the moisture in the soil beneath the settled section the building is either too wet or too dry.
Likely causes:
Drought drying out soil, especially soils containing reactive clay |
|
Shrinking clay |
|
Liquefaction caused by earth movement and earthquakes |
|
Washaways from broken pipes |
|
Floods |
|
Poorly compacted fill |
How to fix large cracks in walls
The best long-term solution for fixing large cracks is to lift, re-level and re-support the building. This level correction process is called underpinning. As the building is re-levelled, the cracks in walls may close or become smaller (ready to plaster or render walls for fine patching and repainting). Windows and doors will also usually begin to work properly again. Traditional underpinning or level correction methods involve excavating or digging up parts of the foundation, pouring in concrete, waiting for it to set and then jacking up the building off the concrete blocks. However, this traditional method can be time consuming (often requiring weeks or months) and messy. It usually means you’ll have to vacate part or all of the building while tradespeople work.
Mainmark’s level correction methods are much friendlier, both to the building and to those that occupy it. Our non-invasive techniques are cost and time efficient.
Various product warranties and Building Code requirements apply (please contact us to see which apply in your region or country).
Key benefits of Mainmark’s level correction methods include:
There is minimum disruption to the site. |
|
There is little, if any, downtime to the business. In many cases, the site can still operate, with staff able to continue working (this is case-dependent, damage may be such this is not possible). |
|
Projects are completed in a time-frame significantly less than traditional methods. |
|
Non-invasive techniques keep further damage to the building, and the landscaping around it, to an absolute minimum |
|
We don’t tear up floors and excavate ground, so do not create mess. |
|
Internal and external wall cracks generally close up, leaving only cosmetic treatment (plastering, painting and re-pointing brickwork) |
|
Jammed doors and windows can usually operate properly again |
|
The methods we use strengthen weak ground, so the building becomes level, crack-free and more stable. |
